Free Construction Tool

Concrete Calculator – Yards, Bags, Weight & Cost

Use our free concrete calculator to estimate how much ready-mix concrete you need. Enter dimensions for a slab, wall, post hole or round column. Get cubic yards, cubic feet, cubic meters, bag quantities, approximate weight and optional material cost in seconds.

How much concrete do I need? Measure the project dimensions, calculate its volume, then add a waste allowance. For a rectangular pour, multiply length × width × thickness using matching units. This calculator converts the result into cubic yards or cubic meters and rounds bag quantities up.
Live calculator search
Search Results 0 results
Search the calculator library.
View All Calculators

Concrete Volume Calculator

Choose a project shape, enter measurements, and calculate instantly.

Select project shape
Order & material settings

Planning buffer, not a guaranteed requirement.

Uses approximate cured yields.

Your Concrete Estimate

Total including waste
1.63 yd³
44.00 ft³ • 1.25 m³
Base volume1.48 yd³
Concrete bags74 bags
Approx. wet weight6,600 lb
Ready-mix costAdd price
Calculation breakdown
Length × width × thickness → base volume; add waste allowance.

Bag yields are estimates: 40 lb ≈ 0.30 ft³, 60 lb ≈ 0.45 ft³, 80 lb ≈ 0.60 ft³. Check your product label. Cost covers concrete material only; delivery, labor, taxes and fees are not included. Structural dimensions must follow the project design.

How to Use the Concrete Calculator

Four simple steps to estimate your pour before ordering.

1. Select a shape

Choose a rectangular slab or wall, a cylindrical post hole or a round concrete column.

2. Enter dimensions

Use feet and inches, or meters and centimeters. Enter the number of identical pours.

3. Adjust the estimate

Add a suitable waste allowance, select a bag size and add your local price if available.

4. Review results

See cubic yards, cubic feet, cubic meters, concrete bags, estimated weight and cost.

5. Check real conditions

Account for uneven excavation, forms, reinforcement, compaction and actual delivery minimums.

6. Confirm your order

Verify quantities and specifications with a supplier or qualified construction professional.

How Much Concrete Do I Need?

The concrete volume you need depends on the shape and dimensions of your project. The most common unit for US ready-mix orders is the cubic yard. One cubic yard equals 27 cubic feet, or about 0.7646 cubic meters. For smaller jobs, bagged concrete may be more practical.

Concrete Volume Formula

For a rectangular slab, driveway or wall, calculate volume by multiplying length × width × thickness. Convert every dimension to the same unit first. Divide cubic feet by 27 to get cubic yards. For bulk-material unit conversions, use our Cubic Yard Calculator. If you only know your project area, first measure it with the Square Footage Calculator.

Concrete Calculator Yards Example

A 12 ft × 10 ft slab with a 4 in thickness needs 12 × 10 × (4 ÷ 12) = 40 ft³, or about 1.48 yd³ before waste. With a 10% allowance, the order estimate becomes about 1.63 yd³.

Concrete Bag Calculator

Bag yield varies by brand and product. For planning, an 80 lb premixed bag often yields approximately 0.6 cubic feet. Divide the target concrete volume in cubic feet by the bag yield, then round up to a whole bag. For the example above, 44 ft³ ÷ 0.6 gives approximately 74 bags. Confirm the bag’s stated yield before purchase.

Concrete Cost Calculator

Enter a quoted price per cubic yard or cubic meter to estimate concrete material cost. Prices vary by location, supplier, grade, quantity and delivery terms. This calculator does not assume a market price, which helps avoid misleading estimates. For broader project budgets including other materials, use the Building Material Cost Calculator.

Concrete Weight Calculator

Normal-weight concrete is often estimated at about 2,400 kg/m³ (roughly 150 lb/ft³). Actual density depends on mix design and aggregates. The weight estimate uses your selected density and calculated volume.

Concrete Calculator: Volume, Bags, Weight and Cost

This concrete calculator estimates how much wet concrete you need for a rectangular pour, wall, circular post hole or solid round column. Enter the dimensions, choose US or metric units, and set a waste allowance. The tool returns concrete volume in cubic yards, cubic feet and cubic meters, plus estimated premixed bags, wet weight and material-only ready-mix cost.

Choosing the Right Concrete Calculation

For a concrete slab or driveway, enter length, width and thickness. For a wall, use its length, height as the second linear dimension, and thickness. For post holes and round columns, use diameter and depth or height, then set the quantity. A post hole estimate assumes a full cylindrical concrete fill; if a post displaces concrete volume, the result can overestimate the required mix. Do not use these volume calculations to choose structural dimensions.

Concrete Slab Volume in Cubic Yards

With measurements in feet, the formula is length × width × (thickness in inches ÷ 12) ÷ 27. A 20 ft by 12 ft slab that is 4 inches thick takes 80 cubic feet, or about 2.96 cubic yards before waste. With 10% waste, plan for about 3.26 cubic yards. Slab reinforcement, control joints and concrete strength requirements are separate design questions.

Concrete for Round Post Holes and Columns

The volume of one round cylinder is π × radius² × depth, using the same unit for radius and depth. Multiply by the number of holes or columns. Example: a 12-inch diameter hole with a 3 ft depth has an approximate volume of 2.36 cubic feet. Ten identical holes need around 23.56 cubic feet before waste. Reduce for the volume displaced by a post if relevant.

How Many Bags of Concrete Do I Need?

Use total cubic feet ÷ yield per bag, then round up. For estimates, common nominal yields are about 0.30 ft³ per 40 lb bag, 0.45 ft³ per 60 lb bag and 0.60 ft³ per 80 lb bag. These are planning assumptions rather than guaranteed values. For example, a 40 ft³ pour with 10% allowance needs 44 ft³. At 0.60 ft³ per 80 lb bag, that is 74 bags. Your product packaging is the correct source for actual yield and required water.

How to Estimate Ready-Mix Concrete Cost

Use estimated cubic yards × your quoted price per cubic yard. Enter the supplier’s price rather than relying on a generic national average. For example, at a hypothetical rate of $150 per cubic yard, 3.26 cubic yards would cost about $489 in concrete material. This illustration excludes short-load fees, delivery, pumping, forms, reinforcement, labor, tax and site preparation. For gravel underlayment, try the Gravel Calculator.

Concrete Weight and Density

Concrete weight is estimated using volume in cubic meters × assumed density in kilograms per cubic meter. The default density of 2,400 kg/m³ is typical for normal-weight concrete, but real mixes vary. This estimate is not a basis for load-bearing design, hauling permissions or lifting plans.

What About Concrete Mix Ratios?

A concrete volume estimate does not determine cement, sand, aggregate or water quantities for a site-batched mix. Mix proportions depend on material characteristics, strength requirements and the approved mix design. This calculator estimates completed concrete volume and premixed bag quantities only; it does not present an unsupported concrete mix ratio.

How to Avoid Ordering Too Little or Too Much

Check dimensions at several points, especially for uneven ground. Confirm excavation depth, the finished grade, the number of separate pours and any formwork displacement. A 10% buffer is provided as an editable example, not a universal construction rule. Discuss order increments, minimum deliveries and onsite waste handling with your supplier.

Estimator note: This tool is for quantity planning, not structural engineering advice. For foundations and safety-critical work, follow approved drawings, applicable codes and professional recommendations.

Frequently Asked Questions

Answers to common questions about concrete volume, bags and ordering.

How do I calculate cubic yards of concrete?

Multiply the length, width and thickness in feet to get cubic feet. Divide by 27 to convert cubic feet into cubic yards, then account for an appropriate waste allowance.

How many 80 lb bags of concrete make one cubic yard?

At an estimated yield of 0.6 ft³ per bag, one cubic yard requires about 45 bags (27 ÷ 0.6). Check the actual yield printed on your chosen bag.

Does the calculator include labor and delivery cost?

No. The optional cost figure uses only the ready-mix unit price you enter. It excludes delivery charges, labor, pumping, taxes and other fees.

Can I calculate concrete for post holes?

Yes. Select Post Hole, enter the diameter and depth, and add the number of identical holes. The estimate treats each hole as a cylinder; actual holes may have irregular shapes.

How much extra concrete should I order?

A buffer depends on job size, measurements, site conditions and supplier practices. The default 10% is a changeable planning assumption, not a universal recommendation.

Can I switch between metric and US measurements?

Yes. The calculator supports feet and inches or meters and centimeters, and it reports volumes in cubic feet, cubic yards and cubic meters.

\n