Brick Calculator – Estimate Bricks for Walls & Openings
Use this free brick calculator to estimate brick quantities, mortar-joint allowances, waste and material cost. Add walls individually, account for doors and windows, and watch the brick-wall diagram change with your dimensions.
Brick Wall Dimensions
Enter wall measurements and select the brick size used for the wall face.
Add each opening, then assign the wall where it appears.
Brick Quantity Results
How to Use the Brick Calculator
1. Choose brick sizes
First, select the brick format and mortar-joint thickness. Brick dimensions differ across manufacturers, so use actual supplier dimensions when possible.
2. Add wall dimensions
Next, enter the length and height for each wall. Add another wall whenever your masonry project covers more than one surface.
3. Include openings
Then, assign doors and windows to their walls. Their measured areas are deducted from the wall-face quantity estimate.
4. Plan the brick order
Finally, set a realistic waste allowance. Review the live brick wall diagram and download the estimate for your contractor or supplier.
For other masonry materials, use the Concrete Block Calculator for CMU wall units and the Mortar Calculator for mortar volume. When you need concrete rather than bricks, open the Concrete Calculator.
Brick Calculation Formula and Wall Coverage
Find the wall face area
Gross area = Sum of (wall length × wall height). Subtract the areas of doors and windows to determine the net face area. The Square Footage Calculator can help check area measurements.
Account for mortar joints
Area per brick module = (brick length + joint) × (brick height + joint). Therefore, the estimated count equals net area divided by module area. Round up to whole bricks.
Allow for cuts and waste
Order quantity = Round up (estimated bricks × (1 + waste % ÷ 100)). This is a wall-face estimate; however, corners, patterns and wall thickness may require additional planning.
Single-wythe versus multi-wythe brickwork
This tool counts bricks based on the visible wall face for a single-wythe installation. It does not automatically calculate cavity walls, double-wythe assemblies, pier details or structural requirements. For a multi-wythe project, estimate each wythe separately or use a project-specific takeoff.
Brickwork and mortar estimates
Joint dimensions affect how many bricks fit into a wall. Nevertheless, accurate mortar volume also depends on bond pattern, wall depth and job-site waste. Use the dedicated Mortar Calculator for a separate mortar estimate rather than treating brick face coverage as mortar-bag quantity.
Common Brick Sizes and Estimation Notes
| Brick type | Approx. actual face length | Approx. actual face height | Typical use |
|---|---|---|---|
| US modular | 7⅝ in | 2¼ in | Common wall facing |
| Queen | 7⅝ in | 2¾ in | Taller face style |
| King | 9⅝ in | 2⅝ in | Larger brick face |
| Custom | Your entry | Your entry | Supplier-specific sizes |
Sizes are common reference dimensions, not universal product standards. Confirm actual unit dimensions and joint recommendations with your supplier.
Why brick size matters
Larger face dimensions typically mean fewer bricks per square foot. Conversely, smaller bricks produce more units and more joints. Because manufacturers vary, use custom inputs when selected products do not match the presets.
Brick Wall Calculation Examples
12 ft × 8 ft wall
A wall measures 96 sq ft before openings. With nominal 8 × 2⅝-in modular coverage including joints, a planning rate is roughly 6.86 bricks per sq ft; precise rounding depends on selected joints.
Walls with windows
When a wall includes a 3 × 4 ft window, the opening area is 12 sq ft. Therefore, a 96 sq ft wall has 84 sq ft of net masonry face area, before considering edge cuts.
Multiple wall estimates
If your project has four separate walls, add all four using Add Wall. Each opening can be assigned to its corresponding wall.
For brick paving, use the Paver Calculator instead. If the project includes a cast concrete base, the Concrete Slab Calculator estimates slab material. Also, the Gravel Calculator helps plan granular base quantities.
Brick Wall Planning, Costs and Related Materials
What affects total brick wall cost?
Brick pricing varies by type, finish, manufacturer and local availability. Moreover, site access, labor, equipment, scaffold needs and structural detailing can change the full project price. This calculator multiplies estimated brick quantity by the unit price you enter; it does not estimate installation labor.
Walls, framing and finishes
Brick veneer may be part of a broader wall assembly. For related planning, compare framing with the Stud Calculator and sheet materials with the Plywood Calculator. Additionally, the Insulation Calculator helps estimate coverage behind supported wall systems.
Exterior site projects
Some masonry projects require grading, pavement and water management. In those cases, the Slope Calculator helps calculate grade, while the Asphalt Calculator and Paver Calculator cover different surface materials. For project budgeting, the Building Material Cost Calculator can organize separate material costs.
Frequently Asked Questions
How many bricks do I need per square foot?
The number depends on actual brick dimensions and mortar-joint thickness. A common US modular brick face with a ⅜-inch joint gives about 6.86 bricks per sq ft. Enter your dimensions for a project-specific estimate.
Does the brick calculator subtract doors and windows?
Yes. Add each opening, choose its wall and enter width, height and quantity. The tool subtracts valid opening areas and shows the net wall face area.
Can I calculate several brick walls together?
Yes. Use Add Wall to create separate length and height inputs. As a result, all walls are included in the total estimate.
Does it calculate mortar bags?
No. Brick quantity and mortar volume are separate tasks. For mortar mixes, joint fill and bag estimates, use the Mortar Calculator.
How much brick waste should I include?
A planning allowance might be 5–10% for simple work, but intricate bonds, angled cuts and site conditions may require more. Adjust the percentage according to your contractor or supplier.
Does the tool estimate brick pavers?
No. Wall bricks and paving units use different layouts. Use the Paver Calculator for paved areas.
Does this estimate double-thickness brick walls?
Not automatically. The calculation is based on a single-wythe wall face. Complex or multi-wythe assemblies need a separate takeoff.
Can I use custom brick dimensions?
Yes. Choose Custom face size, then enter actual brick length and height in inches. The material quantity updates instantly.
Useful Construction and Masonry Calculators
These related calculators support quantity estimation, wall preparation and construction planning.
