Siding Calculator – Estimate Siding, Coverage & Cost
Estimate siding for exterior walls, gables, doors and windows. Enter each wall separately; then compare coverage, pieces, cartons and your own material prices.
Project dimensions
Your siding estimate
Blue openings mark doors and windows. Walls share a common scale; openings are automatically placed. This illustration is not an architectural drawing or a cutting schedule.
Area-based ordering estimate. Trim, battens, starter strips, corner posts, flashing, house wrap, fasteners, tax and delivery are excluded. However, your supplied prices can help compare field-siding options.
How to use the siding calculator
First, choose feet or metres for your exterior wall measurements. Add each wall and enter its length and rectangular height. For a gable, also enter the triangular rise above the rectangular wall.
Next, add doors and windows beneath the wall dimensions. Assign every opening to the correct wall, and enter its width, height and quantity. Because opening positions are not supplied, the live preview places them automatically.
Choose the right coverage method
For horizontal lap siding, enter usable piece length and installed exposure. Alternatively, choose panel mode and enter effective installed width and height. If the carton label already gives net coverage, select carton mode instead.
Finally, set waste and any optional prices. Results update immediately; therefore, you can compare product coverage without submitting a separate form. Print / PDF includes the current results and wall diagram.
How to calculate siding quantities
Wall area, gables and openings
A rectangular wall has area equal to length × height. Additionally, a triangular gable adds ½ × wall length × gable rise. Sum those areas, then subtract the assigned door and window areas.
For example, a 20 ft × 10 ft wall with a 4 ft gable rise has 240 sq ft of gross area. A 3 ft × 7 ft door removes 21 sq ft; consequently, the net area becomes 219 sq ft.
Exposure, pieces and siding squares
Lap-piece coverage = length in feet × exposure in inches ÷ 12. In contrast, panel coverage uses installed width × installed height, both in feet. This calculator converts metric wall measurements before applying those product units.
Order area = net area × (1 + waste percentage ÷ 100). Divide that area by effective piece coverage and round upward. If you enter pieces per carton, the order rounds again to complete cartons. One siding square represents 100 sq ft; therefore, squares equal order area ÷ 100.
Why the estimate is area based
Although openings reduce coverage, they do not always save complete boards. Short offcuts, lap joints and angled gable cuts can also increase consumption. As a result, verify the takeoff against wall-by-wall courses, available lengths and the supplier’s coverage information.
Worked siding estimate
Consider a 20 ft × 10 ft rectangular wall with no openings. First, add 10% waste to its 200 sq ft net area: 200 × 1.10 = 220 sq ft.
A 12 ft piece at 7 in exposure covers 7 sq ft. Therefore, 220 ÷ 7 = 31.43, rounded up to 32 pieces. With 10 pieces per carton, order 4 cartons, or 40 pieces. The allowance represents 2.2 siding squares before carton rounding.
Vinyl, fiber cement and metal siding
This siding estimator uses your supplied coverage rather than assuming a fixed brand profile. Consequently, it can support vinyl siding, fiber cement lap siding and metal wall panels when the installed coverage is known.
Vinyl siding calculator inputs
For vinyl products, start with the manufacturer’s effective profile coverage. If a carton states its net square-foot coverage, carton mode avoids guessing how many pieces it contains. Additionally, price that mode per carton.
Hardie siding and other fiber cement products
For a Hardie siding estimate, use the selected product’s actual usable length and exposure. However, this tool does not prescribe installation spacing, fastening or clearances. For related coverage behind the cladding, use the Insulation Calculator. Consult the current James Hardie product information and the applicable installation guide.
Vertical panels and board-and-batten projects
Panel mode estimates the main cladding from its effective installed dimensions. Board-and-batten siding also needs battens, corners and opening trim; therefore, calculate those separately. For the supporting wall assembly, use the Stud Calculator for framing and the Plywood Calculator for sheet coverage. The horizontal or vertical preview shows orientation, rather than a brand-specific joint pattern.
Understanding siding costs
Material cost uses the rounded order quantity multiplied by your entered unit price. Meanwhile, labour uses net siding area multiplied by your labour rate. Their sum gives the displayed estimate. Additionally, the Building Material Cost Calculator can help organize other material quantities and prices.
If both prices remain zero, the result is an unpriced quantity estimate. Furthermore, replacement work may involve removal, disposal,sheathing repairs or weather-barrier work. Add these quote items separately before deciding on a project budget.
Frequently asked questions
Wall Measurements, Gables & Siding Coverage
Can I calculate house siding from floor area?
Floor area alone does not give exterior wall area. Instead, enter the individual exterior elevations, heights and gables. Two houses with equal floor space can have different siding requirements.
Should I use full plank width or exposure?
Use installed exposure for lap siding. Because overlapping portions do not add visible wall coverage, full width can understate the required quantity. Confirm exposure on the product specification.
Are doors and windows deducted?
Yes. Each opening is deducted from its selected wall. However, dimensions must fit within the rectangular wall portion, and combined openings cannot exceed that portion’s area.
Material Ordering, Waste Allowance & Print Results
Does the calculator include trim and accessories?
No. Field siding is estimated separately from trim, starter strips, flashing and fasteners. Therefore, prepare an accessory takeoff using actual edges and manufacturer requirements.
How much waste should I enter?
The starting 10% is an editable example. For complex cuts or difficult elevations, a different allowance may be appropriate. Ask your installer or supplier to check the intended layout.
Will the live diagram print with my results?
Yes. Print / PDF opens a results-only document containing the updated wall diagram. Then select your printer or Save as PDF. No date or time is added by the calculator; browser headers are controlled in the print dialog.
Related construction calculators
For connected project estimates, explore these tools. Additionally, use each calculator only for the material or measurement it describes.
